lynxのインストールと設定
　私たち視覚障害者は、lynxと言うwwwブラウザーを 使うのが一番良いようです。では、このlynxのインストールです。 まず、cdromのpackages/wwwに lynx-2.8.xx.tgzを、pkg_addしてください。つまり
# pkg_add lynx-2.8.xx.tgz
これでインストールは終わりです。

次に、以下の物を、ご自分のhome directoryに、.lynxrcとして置いて下さい。
------.lynxrc------- # ~/.lynxrc

# Lynx User Defaults File
#
# This file contains options saved from the Lynx Options Screen (normally
# with the '>' key). There is normally no need to edit this file manually,
# since the defaults here can be controlled from the Options Screen, and the
# next time options are saved from the Options Screen this file will be
# completely rewritten. You have been warned...
# If you are looking for the general configuration file - it is normally
# called lynx.cfg, and it has different content and a different format.
# It is not this file.

# file_editor specifies the editor to be invoked when editing local files
# or sending mail. If no editor is specified, then file editing is disabled
# unless it is activated from the command line, and the built-in line editor
# will be used for sending mail.
file_editor=mule

# bookmark_file specifies the name and location of the default bookmark
# file into which the user can paste links for easy access at a later
# date.
bookmark_file=lynx_bookmarks.html

# If sub_bookmarks is not turned "off", and multiple bookmarks have
# been defined (see below), then all bookmark operations will first
# prompt the user to select an active sub-bookmark file. If the default
# Lynx bookmark_file is defined (see above), it will be used as the
# default selection. When this option is set to "advanced", and the
# user mode is advanced, the 'v'iew bookmark command will invoke a
# statusline prompt instead of the menu seen in novice and intermediate
# user modes. When this option is set to "standard", the menu will be
# presented regardless of user mode.
sub_bookmarks=standard

# The following allow you to define sub-bookmark files and descriptions.
# The format is multi_bookmark=,
# Up to 26 bookmark files (for the English capital letters) are allowed.
# We start with "multi_bookmarkB" since 'A' is the default (see above).
multi_bookmarkB=
multi_bookmarkC=
multi_bookmarkD=
multi_bookmarkE=
multi_bookmarkF=
multi_bookmarkG=
multi_bookmarkH=
multi_bookmarkI=
multi_bookmarkJ=
multi_bookmarkK=
multi_bookmarkL=
multi_bookmarkM=
multi_bookmarkN=
multi_bookmarkO=
multi_bookmarkP=
multi_bookmarkQ=
multi_bookmarkR=
multi_bookmarkS=
multi_bookmarkT=
multi_bookmarkU=
multi_bookmarkV=
multi_bookmarkW=
multi_bookmarkX=
multi_bookmarkY=
multi_bookmarkZ=

# The file_sorting_method specifies which value to sort on when viewing
# file lists such as FTP directories. The options are:
# BY_FILENAME -- sorts on the name of the file
# BY_TYPE -- sorts on the type of the file
# BY_SIZE -- sorts on the size of the file
# BY_DATE -- sorts on the date of the file
file_sorting_method=BY_FILENAME

# personal_mail_address specifies your personal mail address. The
# address will be sent during HTTP file transfers for authorization and
# logging purposes, and for mailed comments.
# If you do not want this information given out, set the NO_FROM_HEADER
# to TRUE in lynx.cfg, or use the -nofrom command line switch. You also
# could leave this field blank, but then you won't have if it included in
# your mailed comments.
personal_mail_address=taro@hogehoge.co.jp

# If case_sensitive_searching is "on" then when the user invokes a search
# using the 's' or '/' keys, the search performed will be case sensitive
# instead of case INsensitive. The default is usually "off".
case_sensitive_searching=off

# The character_set definition controls the representation of 8 bit
# characters for your terminal. If 8 bit characters do not show up
# correctly on your screen you may try changing to a different 8 bit
# set or using the 7 bit character approximations.
# Current valid characters sets are:
# ISO Latin 1
# ISO Latin 2
# Other ISO Latin
# DEC Multinational
# IBM PC character set
# IBM PC codepage 850
# Macintosh (8 bit)
# NeXT character set
# KOI8-R character set
# Chinese
# Japanese (EUC)
# Japanese (SJIS)
# Korean
# Taipei (Big5)
# 7 bit approximations
# Transparent
# PC Latin2 CP 852
# DosCyrillic (cp866)
# MS Windows CP 1252
# MS Windows CP 1250
# WinCyrillic (cp1251)
# Vietnamese (VISCII)
# ISO Latin 3
# ISO Latin 4
# ISO 8859-5 Cyrillic
# ISO 8859-6 Arabic
# ISO 8859-7 Greek
# ISO 8859-8 Hebrew
# ISO 8859-9 (Latin 5)
# ISO 8859-10
# UNICODE UTF 8
# RFC 1345 w/o Intro
# RFC 1345 Mnemonic
character_set=Japanese (EUC)

# preferred_language specifies the language in MIME notation (e.g., en,
# fr) which Lynx will indicate you prefer in requests to http servers.
# If a file in that language is available, the server will send it.
# Otherwise, the server will send the file in it's default language.
preferred_language=jp

# preferred_charset specifies the character set in MIME notation (e.g.,
# ISO-8859-2, ISO-8859-5) which Lynx will indicate you prefer in requests
# to http servers using an Accept-Charset header. The value should NOT
# include ISO-8859-1 or US-ASCII, since those values are always assumed by
# default. If a file in that character set is available, the server will
# send it. Otherwise, the server will send the file in ISO-8859-1 or
# US-ASCII.
preferred_charset=ISO-2022-JP

# If vi_keys is set to "on", then the normal VI movement keys:
# j = down k = up
# h = left l = right
# will be enabled. These keys are only lower case.
# Capital 'H', 'J' and 'K will still activate help, jump shortcuts,
# and the keymap display, respectively.
vi_keys=off

# If emacs_keys is to "on" then the normal EMACS movement keys:
# ^N = down ^P = up
# ^B = left ^F = right
# will be enabled.
emacs_keys=off

# show_dotfiles specifies that the directory listing should include
# "hidden" (dot) files/directories. If set "on", this will be
# honored only if enabled via userdefs.h and/or lynx.cfg, and not
# restricted via a command line switch. If display of hidden files
# is disabled, creation of such files via Lynx also is disabled.
show_dotfiles=off

# select_popups specifies whether the OPTIONs in a SELECT block which
# lacks a MULTIPLE attribute are presented as a vertical list of radio
# buttons or via a popup menu. Note that if the MULTIPLE attribute is
# present in the SELECT start tag, Lynx always will create a vertical list
# of checkboxes for the OPTIONs. A value of "on" will set popup menus
# as the default while a value of "off" will set use of radio boxes.
# The default can be overridden via the -popup command line toggle.
select_popups=on


# If keypad_mode is set to "NUMBERS_AS_ARROWS", then the numbers on
# your keypad when the numlock is on will act as arrow keys:
# 8 = Up Arrow
# 4 = Left Arrow 6 = Right Arrow
# 2 = Down Arrow

# linedit_mode specifies the key binding used for inputting strings in
# prompts and forms. If lineedit_mode is set to "Default Binding" then
# the following control characters are used for moving and deleting:
#
# Prev Next Enter = Accept input
# Move char: <- -> ^G = Cancel input
# Move word: ^P ^N ^U = Erase line
# Delete char: ^H ^R ^A = Beginning of line
# Delete word: ^B ^F ^E = End of line
#
# Current lineedit modes are:
# Default Binding
lineedit_mode=Default Binding

# dir_list_styles specifies the directory list style under DIRED_SUPPORT
# (if implemented). The default is "MIXED_STYLE", which sorts both
# files and directories together. "FILES_FIRST" lists files first and
# "DIRECTORIES_FIRST" lists directories first.
dir_list_style=MIXED_STYLE

# user_mode specifies the users level of knowledge with Lynx. The
# default is "NOVICE" which displays two extra lines of help at the
# bottom of the screen to aid the user in learning the basic Lynx
# commands. Set user_mode to "INTERMEDIATE" to turn off the extra info.
# Use "ADVANCED" to see the URL of the currently selected link at the
# bottom of the screen.
user_mode=ADVANCED

# show_cursor specifies whether to 'hide' the cursor to the right (and
# bottom, if possible) of the screen, or to place it to the left of the
# current link in documents, or current option in select popup windows.
# Positioning the cursor to the left of the current link or option is
# helpful for speech or braille interfaces, and when the terminal is
# one which does not distingish the current link based on highlighting
# or color. A value of "on" will set positioning to the left as the
# default while a value of "off" will set 'hiding' of the cursor.
# The default can be overridden via the -show_cursor command line toggle.
show_cursor=on

# and the corresponding keyboard numbers will act as arrow keys,
# regardless of whether numlock is on.
# If keypad_mode is set to "LINKS_ARE_NUMBERED", then numbers will
# appear next to each link and numbers are used to select links.
# If keypad_mode is set to "LINKS_AND_FORM_FIELDS_ARE_NUMBERED", then
# numbers will appear next to each link and visible form input field.
# Numbers are used to select links, or to move the "current link" to a
# form input field or button. In addition, options in popup menus are
# indexed so that the user may type an option number to select an option in
# a popup menu, even if the option isn't visible on the screen. Reference
# lists and output from the list command also enumerate form inputs.
# NOTE: Some fixed format documents may look disfigured when
# "LINKS_ARE_NUMBERED" or "LINKS_AND_FORM_FIELDS_ARE_NUMBERED" are
# enabled.
keypad_mode=LINKS_AND_FORM_FIELDS_ARE_NUMBERED
-----------------------

　　　lynxの使い方
簡単に使い方を書いておきます。
コマンドラインから
% lynx http://www.win.ne.jp/~katsuaki/
と入力します。するとWebsiteが表示されます。そして次のようなコマンドが使えます。
↑ と ↓ でリンク文字列を順次選択します。
→ でリンク先へジャンプします。
← で前のページへ戻ります。
z で読み込みを中断します。
g もしくは G で直接 URL を入力して Enter で閲覧するページに移動します。
a で現在のファイルをブックマークに登録します。
v でブックマークの一覧を表示します。
Backspace で最近の閲覧履歴が表示されます。
q もしくは Q で Lynx を終了します。
PageUP もしくは Ctrl-b で上に向かって一画面スクロールします。
PageDown もしくは Ctrl-f で下に向かって一画面スクロールします。
Ctrl-a でファイルの先頭へ移動します。
Ctrl-e でファイルの末尾に移動します。
# 文書の見出しに移動します。
e で予め指定したエディタで文書を編集します。
d でリンク先文書を保存します。
Ctrl-r で再読み込み。
Ctrl-l もしくは Ctrl-w で画面を再表示します。
= でリンク情報を表示します。
/ で検索(半角英数のみ)。
o でオプション設定します。
r でオプション設定を終了し戻ります。
> で~/.lynxrc に保存終了してから戻ります。
? でショートカットキーを表示します。

こんなところでしょうか。'e'で立ち上がるエディタは、muleが立ち上がるように.lynxrcには書いて有ります。田のエディタにしたければ変えて下さい。 またlynxの日本語マニュアルは以下のWebsiteにあります。
Lynx Users Guide v2.6 (Japanese):LYNXのドキュメントです。
トップページにに戻る